WIZ125SR is an embedded module based on WIZnet W5100 &  ARM Cortex-M3. WIZ125SR is the protocol converter that transmits the data sent by serial equipment as TCP/IP data type, and converts back the TCP/IP data received through the network into serial data to transmit back to the equipment. It supports two serial ports so that it can communicate with two serial equipments at the same time.

  • Serial to Ethernet Module based on W5100 & Cortex-M3
  • Serial signals : TXD, RXD, RTS, CTS, GND signals (2 UART/RS-232C)
  • 2 DB-9 & RJ-45 mounted
  • Support the configuration method of AT command & Configuration tool program
  • 10/100Mbps Ethernet & Max.115.2kbps serial speed
  • Support WIZ VSP (Virtual Serial Port) program
Hardware Specification
  • 2 DB-9 for serial  & 1 RJ-45 for Ethernet interface
  • Dimension (mm) : 88.5(L) x 65.5 (W) x 18 (H)
  • Input Voltage : 5V
  • Max. Power Consumption : 220mA
  • Operation Temperature : 0 ~ 70℃
  • RoHS, SVHC Compliant
  • Configuration Tool for Windows
  • WizVSP: Virtual Serial Port (COM port) for User’s Programs
Hardware Interface

WIZ125SR User Manual V1.0

  • Last Update: 2010.07.10

WIZ125SR Datasheet v1.00

  • Last Update: 2010.05.26

Firmware v1.4

  • Last Update: 2015.08.18
  • Ethernet to Serial Data Transmission problem has been fixed:
    The Ethernet data was not transmitted to the designated serial port. This problem sporadically occurred without any rule.

Firmware v1.3

  • Last Update: 2013.04.18
  • Bug Fixed : When set (Databits : 7), (Parity:odd/even) in UART2, WIZ120/125SR sent wrong data

WIZ120SR /WIZ125SR Configuration Tool for Windows v1.1.0

  • Last Update: 2010.03.31
  • WIZ120SR/WIZ125SR Configuration Tool Installation Package
  • WIZ120SR/WIZ125SR Configuration Tool Source Code

Device Terminal Program for Windows 

  • Last Update: 2015.08.05
  • Simple Configuration & Testing for WIZnet Serial to Ethernet Modules