W5500 Ehternet Shield
Overview
  • ARM mbed compatible operation
  • Arduino Pin-compatible
  • Ethernet (W5500 Hardwired TCP/IP chip)

W5500 Ethernet shield is designed using the WIZnet W5500 chip. Please click the link for the further information about W5500. It supports both 3.3V & 5V. This Ethernet Shield is compatible with Arduino and ARM mbed Platform.

 

Features
  • Suppport 3.3V / 5V
  • High Speed Ethernet controller W5500 chip
  • SPI interface
  • Internal 32Kbytes Tx/Rx buffer
  • 10/100 Ethernet PHY embedded
  • Support Auto Negotiation (Full / Half duplex, 10 / 100-based)
  • Hardwired TCP/IP Protocols : TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
  • User Selectable GPIO pin
  • Support SD-card slot for storage
  • Support I2C, UART interface
Hardware Configuration
  • RJ-45 with Transformer : Ethernet Port
  • W5500 : a hardwired TCP/IP Ethernet Controller
  • RESET : Reset Ethernet shield and Arduino when pressed
  • SD-Slot : support Micro SD card in FAT16 or FAT32 ; (Please Read the Caution)
  • I2C : I2C interface
  • UART : UART interface
Available Board List
  1. ARM mbed Board
  2. Arduino Board
  3. Arduino-compatible Board
Pin Assignment
w5500_ethernet_pin2