Home >

WIZ811MJ

How to buy
  • North America
  • South America
  • Europe
  • Asia
  • Oceania
  • Africa
  • Online Sales

Feature


- Plug-in Network Module having W5100
- Useful for Designing Network Interface Part
- Support Easy & Quick Hardware Design

- Usable without H/W design for W5100, transformer and RJ-45
- Fast evaluation available for W5100 and MCU in the target board
- Supports MCU BUS ans SPI Interface
- Supports auto MDI/MDIX (auto detection of crossover)
- Supports network status indicator LEDs - FDX, TX, RX, LINK, Collision

 

Comparison Table (WIZ810MJ vs. WIZ811MJ vs. WIZ812MJ)

 

 

WIZ810MJ

WIZ811MJ

WIZ812MJ

Architecture

TCP/IP

W5100

PHY

Embedded in W5100

Mag Jack

RDA-125BAG1A

Interface

10/100 Base-T Ethernet (Auto Detection)

Network

Protocol

TCP, UDP, IP, ARP, ICMP, IGMP, PPPoE, MAC

Dimension(mm)

52 x 25 x 21
(W x H x D)

55.5 x 25 x 23.5
(W x H x D)

55.5 x 25 x 23.5
(W x H x D)


Connector Type


2mm pitch
14 x 2 header


2.54mm pitch
10 x 2 header


2.54mm pitch
10 x 2 header

J29 GND
->RX_LED

J210 GND
->TX_LED

J219 GND
->LINK_LED

PCB Through Hole

X

Two PCB Throughhole
(ø3.00mm)

Four PCB Throughhole
(ø3.00mm)

SPI Signal Pin

Shared for SPI
and BUS signals

Separated for
SPI signals
(SPI_EN controlled by /SCS signal)

Separated for
SPI signals
(SPI_EN controlled by /SCS signal)

LINK LED

When the link is established,
LED is on and flashes at the TX or RX

When the link is established,
LED is on,
but not flashes
at the TX or RX

Input Voltage

3.3V internal operation and 5V tolerant I/Os

Temperature

Operation -40 ~ 85(Centigrade Degree)(*)
Storage -40 ~ 85(Centigrade Degree)

Power Consumtion

10/100 baseT max. 185mA (3.3V)

 (*) The temperature -40~85 can be supported from the HW version,

- WIZ810MJ : V1.2

- WIZ811MJ, WIZWIZ812MJ, WIZ830MJ : V1.1

 

QUICK MENU

 

Environ
ment

 

Online Store

 

WIZwiki

 

Distributor

 

Q & A